Skip to content
VANTORRECODE + COMPLIANCE ADVISORY
All resources

Inspection Readiness · 6 min read

Preparing Your Business for a Fire Marshal Inspection

What inspectors commonly look at, how to organize your records, and how to walk your space with fresh eyes before the visit.

Draft article — content pending final review. This is general guidance, not legal advice.

Start with a walk-through

Walk your space the way a visitor would, from the entrance to every exit. Look for anything blocking an exit path, burned-out exit signs, or storage that has crept into corridors. Small, visible items are often the easiest to correct before an inspection.

Gather your records

Collect recent service records for extinguishers, alarms, sprinklers, and any kitchen suppression system. If your landlord maintains some systems, ask for copies. Keeping these in one place makes conversations with an inspector calmer and faster.

Know who is responsible

Leases often divide responsibility for building systems between tenant and owner. Understanding that split helps you know which items you can act on directly and which you should raise with your property manager.

A note on requirements

Applicable requirements vary by jurisdiction, occupancy, and installed systems. This article is general guidance, not legal advice. For questions about your specific property, an independent assessment can help clarify what applies.

Want an independent view of your property?

Next step

Know where you stand before it becomes a problem.

Get a clearer understanding of your property, your readiness, and the next steps that matter.